September 21, 2023

NRC-RA Series

Reverse Geometry AEC-Q200 Thick Film Chip Resistors

NIC Components is pleased to announce the introduction of the NRC-RA Reverse Geometry AEC-Q200 Thick Film Chip Resistors.

Features

• Meets the Requirements of AECQ200
• E-24 and E-96 values ranging from 1 Ω to 1 MΩ
• Higher Power Rating In Standard Thick Film Using Reverse Geometry
• Available in 3 reverse geometry case sizes: 0612, 1020, and 1225

September 6, 2023

NPMG Series

Low Loss Molded Power Inductors

NIC Components, a market leader in performance passives, proudly introduces its latest molded power inductor series, the NPMG series.

Features

• Extremely Low DCR
• Ultra Low DC & AC Losses
• -55~155°C Operating Range
• Improved Isat & Irms vs. NPIM_Z Series
• Supports switching Frequencies up to 5 MHz
• WIDE TEMPERATURE RANGE

August 10, 2023

NSPE-YP Series

Hybrid Aluminum Electrolytic Capacitors

NIC Components (NIC) is proud to announce the launch of the NSPE-YP High Performance 135C Hybrid Polymer Aluminum Electrolytic Capacitors, continuing their unwavering commitment to delivering exceptional performance, rugged design, and extended operational temperature range.

Features

• Endurance: 4,000 hours at 135C
• Higher Ripple Current vs NSPE-TF series
• Larger Capacitance vs. NSPE-TC series
• High Capacitance In Reduced Size
• AEC-Q200 Qualified

July 21, 2023

NGCL Series

Loop Style Ceramic Chip Antennas

NIC Components is pleased to announce the loop style ceramic chip antennas NGCL series.

Features

• Multiple protocols and combinations within a single antenna
• Improved magnetic field dominating loop antenna design
• Reduced sizes down to 0603
• Reduced ground plane
• AEC-Q200 Qualified

June 29, 2023

NRCPA Series

Surface Mount Pulse Withstanding Thick Film Resistors

NIC Components is pleased to announce the new NRCPA pulse withstandingthick film chip resistors; featuring excellent pulse withstanding performance and AEC-Q200 compliance

Features

• EXCELLENT ANTI-SURGE CHARACTERISTICS
• AEC-Q200 QUALIFIED
• RATED POWER UPGRADE IN SMALLER PACKAGE SIZE
• MEETS +85°C/85%RH TEST 1000 HOURS
• ANTI-SULFUR CHARACTERISTICS (EIA-977 CONDITION 1)
• AVAILABLE IN ±0.5% (D) TOLERANCE

May 12, 2023

NGPM Series

High Precision Ceramic Patch Antennas

NIC Components is pleased to announce the high precision ceramic patch antennas NGPM series.

Features

• High-precision positioning applications that utilize multi-band GNSS satellite signals
• Monolithic design offers a compact alternative  to traditional stacked patch antennas
• Ability to achieve locational accuracy within a  few centimeters

February 9, 2023

NTRF Series

Ghz Range Thin Film Chip Resistors

NIC Components is pleased to announce the expansion of the Ghz Range Thin Film Chip Resistors NTRF series which feature low internal reactance and perform as close to a pure resistor even at very high frequencies (40 Ghz).

Features

• SMALL STANDARD SIZE 0402 CASE SIZE
• HIGH PURITY ALUMINA SUBSTRATE
• OHMIC RANGE ( 10 Ω ~ 1K Ω)
• SMALL INTERNAL REACTANCE (< 10 mΩ)
• RESISTOR TOLERANCE TO ±0.1%
• LOW TCR( DOWN TO ±25 PPM/°C

January 9, 2023

NCB-HD Series

Ferrite Chip Beads High Current, Ultra Low DCR

NIC Components is pleased to announce the expansion of the ferrite chip bead lineup with the new High Current, Ultra Low DCR NCB-HD series.

Features

• STANDARD EIA 0402 ~ 1206 CASE SIZES
• HIGH CURRENT BEAD ULTRA LOW DCR
• CURRENT RATINGS UP TO 12 AMPS
• HIGH IMPEDANCE OVER A WIDE FREQUENCY RANGE
• COMPATIBLE WITH AUTOMATIC PICK AND PLACE EQUIPMENT
• BOTH FLOW AND REFLOW SOLDERING APPLICABLE
• AEQ200 Qualified (See Part Number Details For More Information)

November 10, 2022

NPMS Series

Miniaturized Molded Chip Power Inductors

NIC Components is pleased to announce the new NPMS Series: High Performance, Miniaturized Molded Chip Power Inductors. The NPMS series is ultra-small in size and features key performance advantages including large current, low loss, and low magnetic leakage interference.

Features

• Metal material for large current and low loss
• Vinyl thermal spray, better surface compactness
• Closed magnetic circuit design reduces leakage flux

May 26, 2022

NSPE-HC Series

Higher Capacitance per Case Size; Hybrid (Solid-Liquid) Construction

NIC Components Corp. is pleased to announce the release of the NSPE-HC series of AEC-Q200 automotive-grade surface mount aluminum electrolytic capacitors featuring high capacitance (high CV) per case size. The NSPE-HC series is offered in five case sizes from 6.3x6.3 to 10x12.8 (DxH,) covering capacitance values from 56uF to 560uF in voltage ratings of 25VDC and 35VDC over wide operating temperatures; -55°C to +105°C, with a load life rating of 5000 hours at +105°C.

Features

• High Capacitance Value Per Case Size
• Automotive Grade: meets AEC-Q200
• Low ESR & High Ripple Current (≤ 4A) At 100Khz / +105°C
• 5000 Hours Load Life rated at +105°C
• 6.3x6.3 to 10x12.8mm Case Sizes
• Reflow Soldering Rated To +260°C
• Available With Wide Anti-Vibration Terminations

April 15, 2022

NAZHA Series

Higher Capacitance per Case Size; 3000 to 5000 hrs; V-Chip

NIC Components Corp. is pleased to announce the release of the NAZHA series of automotive-grade surface mount aluminum electrolytic capacitors featuring extended load life ratings at +105°C (3000 to 5000 hours).

Features

• Highest CV in 8x10.5 and 10x10.5 sizes
• Auto-Grade; meets AEC-Q200
• Long Life: 3000 to 5000 hrs @ +105°C
• Low Z (0.060 ohm) & High Ripple Current (1.19Arms) @100KHz
• Power Applications: DC-DC
• Available With Wide Anti-Vibration Terminations
• Automatic Mounting and Reflow Solder Rated

March 31, 2022

NAZR Series

High CV, Low Z & High RCR, V-Chip, -55 ~ +105°C (5KHrs)

NIC Components Corp. is pleased to announce the release of the NAZR series of surface mount aluminum electrolytic capacitors featuring extended 5000-hour load life ratings at +105°C (20,000 hours at +85°C). The NAZR series has an operating temperature range of -55°C to +105°C and is available in six case sizes in 12.5mm, 16mm, and 18mm diameters covering capacitance values from 47uF to 10,000uF in voltage ratings from 6.3VDC to 100VDC.

Features

• High capacitance values in voltage ratings up to 100VDC
• Long Life: 5000 hrs @ +105°C
• Low Z (0.028 Ohm) & High Ripple Current (2.64 Arms) at 100Khz
• Automatic Mounting, and Reflow Soldering
• Power Applications: DC-DC and AC-DC
• Available With Wide Anti-Vibration Terminations

March 25, 2022

NCCH Series

AEC-Q200 Common Mode Choke; High Current -40°C ~ 125°C

NIC Components Corp. is pleased to announce the expansion of the NCC series of surface mount common mode chokes featuring three new AEC-Q200 automotive-grade; NCCH, NCCR, and NCCD product series.

Features

• Features:
• • High common mode Impedance at high frequencies
• • High reliability complies with ACE-Q200
• • Provides excellent noise suppression
• • For high-speed placement and reflow soldering
• • Low profile

March 25, 2022

NCCD Series

AEC-Q200 Common Mode Choke; For CAN-FD -40°C ~ 125°C

NIC Components Corp. is pleased to announce the expansion of the NCC series of surface mount common mode chokes featuring three new AEC-Q200 automotive-grade; NCCH, NCCR, and NCCD product series.

Features

• Features:
• • High common mode Impedance at high frequencies
• • High reliability complies with ACE-Q200
• • Provides excellent noise suppression
• • For high-speed placement and reflow soldering
• • Low profile

March 25, 2022

NCCR Series

AEC-Q200 Common Mode Choke; For CAN-FLEXRAY -50°C ~ +150°C

NIC Components Corp. is pleased to announce the expansion of the NCC series of surface mount common mode chokes featuring three new AEC-Q200 automotive-grade; NCCH, NCCR, and NCCD product series.

Features

• Features:
• • High common mode Impedance at high frequencies
• • High reliability complies with ACE-Q200
• • Provides excellent noise suppression
• • For high-speed placement and reflow soldering
• • Low profile

January 27, 2022

NLTN Series

LAN Transformers

NIC Components Corp. is pleased to announce the release of the NLTN series of LAN Transformers for use in 10/100 Ethernet, Single 1G, 2.5G, Single 10G and Dual 1G Ethernet Applications. The NLTN series offers improved signal transmission, increased transmission distance, impedance matching, waveform repair, and signal clutter suppression as compared to discrete designs.

Features

• Gigabit Ethernet Applications
• IEC 61000-4-5 10/700us 4KV (CM)
• IEC 61000-4-5 10/700us 1KV (DM)
• Small SMT Packages and form factor
• Wide Temperature: -40℃ to +85℃

December 3, 2021

NPIS_HA Series

High Current Shielded Power Inductors - Auto Grade

NIC Components is pleased to announce the expansion of the NPIS_ series of high current shielded power inductor family with the addition of the new automotive grade NPIS_HA series.

Features

• Meets AEC-Q200
• Magnetic Resin Shielded
• Robust Shock Resistance SMT Construction
• 30% Higher Current Rated (Up to 16Amps)
• -40°C to +125°C (including self-heating)
• High Inductance (Up to 330uH)
• Tape and Reeled for Automatic Placement

November 4, 2021

NSPE-UT Series

Ultra Low ESR Extended Temerature
Hybrid (Solid-Liquid) Construction

NIC Components Corp. is pleased to announce the release of the NSPE-UT series of surface mount SMT aluminum electrolytic capacitors featuring +150°C operating rating and extended lifetimes at reduced operating temperatures (i.e., >22,000 hours at +125°C & >10 years at +105°C) for 8mm & 10mm case sizes. NSPE-UT series meets AEC-Q200, and is available in six sizes; 6.3x8 to 10x16.5 (DxH) covering capacitance values from 47uF to 470uF in voltage ratings of 35VDC, and 63VDC.

Features

• Cylindrical V-Chip Construction for Surface Mounting
• High Temperature Rated +150°C (4K hours)
• High Reliability - Long Life:
• >22,000 hours at +125°C & >10 years at +105°C
• Auto grade: Meets AEC-Q200
• Ultra-Low ESR and High Ripple Current
• 6.3x8 to 10x16.5mm Case Sizes
• Reflow Soldering Rated To +260°C

October 25, 2021

NSPE-TS Series

Ultra Low ESR Extended Temerature
Hybrid (Solid-Liquid) Construction

NIC Components Corp. is pleased to announce the release of the NSPE-TS product series of surface mount SMT aluminum electrolytic capacitors utilizing advanced hybrid construction, combining conductive polymer with liquid electrolyte, resulting in low ESR, high ripple current ratings (up to 3.9Arms), self-healing characteristics, and stable performance over -55℃ to +125℃ operating temperature range.

Features

• Ultra-Low ESR and High Ripple Current Performance
• Downsize your circuit (smaller or fewer components)
• Advantages: Self-healing and No Voltage Derating
• Ultra-stable over Temperature & Long lifetime
• Meets the requirements of AEC-Q200
• Strong Moisture Resistance
• Available with Wide Anti-Vibration Terminations

October 7, 2021

NAZP Series

Low Z & High RCR V-Chip -25 ~ +105°C (7KHrs)

NIC Components Corp. is pleased to announce the release of the NAZP product series of surface mount SMT aluminum electrolytic capacitors featuring extended 7000-hour load life ratings at +105�C (which corresponds to 28,000 hours at +85�C and 112,000 hours at +65�C).

Features

• Reduced Case Sizes, Low Profile for High Density Designs
• Cylindrical V-Chip Construction for Surface Mounting
• Long Life: 7,000 Hours @ +105�C
• Low Impedance & High Ripple Current at 100KHz
• Suitable for DC-DC Converter and Regulator Applications
• Designed for Automatic Mounting and Reflow Soldering
• Available with Wide Anti-Vibration Terminations

October 5, 2021

NRLRT Series

Extended Temperature; Long Life; Snap-In

NIC Components Corp. is pleased to announce the release of the NRLRT product series of Snap-In aluminum electrolytic capacitors featuring high voltage ratings for use in primary side smoothing capacitor circuits for LTE / 5G infrastructure and similar high-reliability long-life applications.

Features

• Upgraded Materials and Construction
• Higher Ripple Current Rated
• Top temperature rated; +125°C of Snap-In types
• Long Life at High Temperature:
• + up to 2000 Hours at +125°C
• + up to 8000 hours at +105°C, 32,000 hours at +85°C
• Reduced Case Sizes, Low Profile for High Density Designs

September 30, 2021

NRB-TE Series

Extended Temperature; Long Life High Voltage Alum. E-Cap

NIC Components Corp. is pleased to announce the release of the NRB-TE product series of extended temperature long-life rated radial leaded aluminum electrolytic capacitors. NRB-TE series is intended for use in AC line power circuits requiring high voltage rated 400V, 450V, and 500VDC input filter capacitors. Featuring upgraded materials and construction the NRB-TE series is best suited for use in high-reliability, enterprise-level and, cellular infrastructure applications, including todays small-cell 5G technology.

Features

• MINIATURE SIZE
• LONG LIFE AT HIGH TEMPERATURE (3,000~5,000 HOURS @ +125°C)
• HIGH-RELIABILITY APPLICATIONS
• EXTENDED TEMPERATURE APPLICATIONS (-40°C to +125°C)
• HIGH VOLTAGE POWER SUPPLIES
• CELLULAR INFRASTRUCTURE, LTE / 5G

August 20, 2021

NCSA Series

High Current Shunt Resistor

NIC Components Corp. is pleased to announce the release of the NCSA product series of automotive-grade (AEC-Q200 qualified) current sensing shunt resistors featuring high current ratings in surface mount metal alloy construction.

Features

• Metal Alloy Current Sensing Shunt Resistors
• High Power & Current Rated
• AEC-Q200 Qualified
• Wide Temperature -55°C to +170°C
• Stable TCR
• Halogen-Free & RoHS Compliant
• Taped And Reeled for Automatic Insertion

February 17, 2021

NMC-AP Series

Automotive Grade Soft Termination MLCC

NIC Components Corp. is pleased to announce the release of the NMC-AP product series of automotive-grade (AEC-Q200 qualified) multilayer ceramic chip capacitors (MLCCs) featuring soft polymer terminal (crack resistant) construction. The NMC-AP series provides a safer upgrade to standard solid terminal construction MLCCs. Intended for use in applications requiring high reliability and resistance from cracking due to PCB flexure.

Features

• SOFT TERMINATIONS & AEC-Q200 QUALIFIED
• MANUFACTURED AT ISO/TS 16949 PRODUCTION FACILITY
• SURFACE MOUNT CASE SIZES 0805, 1206 & 1210
• X7R DIELECTRIC
• VOLTAGE RATINGS TO 250VDC

December 23, 2020

NAN-E Series

External WiFi, GSM & LTE Antennas

External Antennas

Features

• Up to 90° Flexibility
• Rubber Duck Type
• Yagi Directional Log Periodic Type
• Single-band, Dual-band & Tri-band Frequency
• LTE Protocals
• RoHs Complaint
• APPLICATIONS
• Meters
• Routers
• Gateways
• Cellular Communication
• Alarm systems

December 23, 2020

NAN-P Series

PCB Antenna

N/A - Pending single announcement covering six NAN series

Features

• 2400 ~ 5400MHz
• LTE, WiFi, Bluetooth
• Single and Dual band frequencies
• Low Profile
• Flexibility in layout
• Multiple options in cabling

December 23, 2020

NAN-EA Series

External Active Antennas

FEATURES: Active Antennas with Integrated Low Noise Amplifiers (LNA) GPS, GLONASS protocols LTE & WIFI Single Band Frequency Tri-band Frequency Quad-band Frequency Low profile Magnetic, Puck and Sharkfin types RoHs Complaint APPLICATIONS: Tracking & Logistics Navigation Fleet Management Survey and Mapping Transportation Industrial Agriculture

Features

• Active Antennas with Integrated Low Noise Amplifiers (LNA)
• GPS, GLONASS protocols
• LTE & WIFI
• Single Band Frequency
• Tri-band Frequency
• Quad-band Frequency
• Low profile
• Magnetic, Puck and Sharkfin types
• RoHs Complaint

December 23, 2020

NAN-H Series

Patch Antenna

NAN-H Series / Patch Antennas GPS Internal Active Patch Antennas GPS / GLONASS Patch Antenna High Gain, Compact Single Band Frequency Pin Type RoHs Compliant Navigation Fleet Management Tracking Survey and Mapping Transportation Industrial Agriculture

Features

• GPS Internal Active Patch Antennas
• GPS / GLONASS Patch Antenna
• High Gain, Compact
• Single Band Frequency
• Pin Type
• RoHs Compliant

December 23, 2020

NAN-C Series

SMT Chip Antennas

NAN-C Series / Chip Antennas Wide Frequency Coverage Low profile Compact size RoHS compliant SMT process compatible Applications: Bluetooth / WiFi UWB - Ultra-wideband IoT applications IEEE 802.11ah/ Wi-Fi Certified HaLow technology IEEE802.11 b/g/n ISM 915 MHz, 2.4 GHz applications ZigBee/BLE applications Hand-held devices when WiFi / Bluetooth functions are needed Wireless PCMCIA cards or USB dongles Automotive sensors Precision surveying Remote controls Centimeter level positioning

Features

• Wide Frequency Coverage
• Low profile
• Compact size
• RoHS compliant
• SMT process compatible

December 23, 2020

NAN-F Series

Flexible Type PCB Construction Antenna

NAN-F Series / Flexible Type PCB Construction Antenna Features: � Flexible Type PCB Construction � Single & Dual Band Frequency � Customizable Cable length and type � RoHS Compliant Applications: � 2G/3G/4G/5G Applications � Cellular Communication � Commercial - Handheld Electronics � Gateways - Routers � Smart Grid - Meters

Features

• Flexible Type PCB Construction
• Single & Dual Band Frequency
• Customizable Cable length and type
• RoHS Compliant
• Meters / Gateways / Routers

December 4, 2020

NCST-C Series

Current Sensing Resistor Chip

NIC Components is pleased to introduce the NCST-C series of current sensing SMT chip resistors utilizing low-cost thick film construction. Supporting power ratings from 1/16W to 2W in industry-standard sizes; 0402, 0603, 0805, 1206, 1210, 2010, and 2512 case sizes. The resistance value range covers 10mΩ to 976mΩ in ±1% (F) and ±5% (J) tolerance with TCR of ±500ppm to ±1500ppm.

Features

• Surface Mount: 0402 to 2512 Case Sizes
• Precision Tolerance (±1% & ±5%)
• Power Ratings Up To 2 Watts
• Standard & High-Power Option (See Page 4)
• Pb-Free Reflow Compatible

September 2, 2020

NPIM_S Series

Shielded Power Inductors

NIC Components Corp. is pleased to announce the release of the NPIM_S series of molded metal composite SMT power inductors. The NPIM_S series is available in thirteen cases sizes ranging from 4.4mm x 4.2mm size to 13.5mm x 12.6mm size (L x W) with low component heights of 1.2mm to 6.0mm. NPIM_S series is ideal for use for high current DC-DC conversion applications in power supplies, industrial equipment, motor drives, LED drivers, networking, and communications applications

Features

• Metal Composite Construction
• High Current
• Isat to 92A, Irms to 72A
• 19 Case Sizes
• Low Profile (1.0mm height)
• Reflow Rated to +260°C

June 10, 2020

NML-HQ Series

Surface Mount Chip Inductor

NIC Components Corp. is pleased to announce the release of the NML-HQ and NML-SQ series of SMT chip inductors, featuring high-frequency performance in a high reliable monolithic construction. Both product series are supplied in ultra-miniature 01005 and 0201 case sizes with high DCI current ratings up to 1100mA. NML-HQ has a lower profile, with a maximum height of 0.22mm for 01005 size and 0.32mm in 0201 size, for height constrained handheld and mobile wireless applications.

Features

• Ultra-miniature 01005 and 0201 case sizes
• High Q (Typ: 50 to 100 @ 2 to 3 GHz)
• High SRF up to 17 GHz
• Wide Inductance value range: 0.2nH to 150nH
• DC Current Ratings up to 1100mA
• Wide Temperature Range: -55�C to +125�C

June 10, 2020

NML-SQ Series

Surface Mount Chip Inductor

NIC Components Corp. is pleased to announce the release of the NML-HQ and NML-SQ series of SMT chip inductors, featuring high-frequency performance in a high reliable monolithic construction. Both product series are supplied in ultra-miniature 01005 and 0201 case sizes with high DCI current ratings up to 1100mA. NML-HQ has a lower profile, with a maximum height of 0.22mm for 01005 size and 0.32mm in 0201 size, for height constrained handheld and mobile wireless applications.

Features

• Ultra-miniature 01005 and 0201 case sizes
• High Q (Typ: 50 to 100 @ 2 to 3 GHz)
• High SRF up to 17 GHz
• Wide Inductance value range: 0.2nH to 150nH
• DC Current Ratings up to 1100mA
• Wide Temperature Range: -55�C to +125�C

May 6, 2020

NCST-A Series

Automotive Current Sensing Chip Resistors

NIC Components is pleased to announce the release of NCST-A series of auto-grade (AEC-Q200 qualified) current sensing SMT chip resistors. Supporting power ratings from 1/16W to 3W in industry-standard sizes; 0402, 0603, 0805, 1206, 1210, 2010, and 2512, as well as reverse geometry 0815 (1W), 0830 (2W) and 1225 (3W) case sizes

Features

• SMT 0402 to 1225 case sizes
• 1 mOhm to 8 Ohm range
• Power Ratings; 1/16W to 3W
• AEC-Q200 Qualified
• Anti-Sulfur Rated; ASTM-B-809-95 H2S, +50°C, 1000 Hours
• Meets +85°C / 85%RH Biased Humidity 1000 Hrs
• Precision Tolerance (±1%)

November 15, 2019

NPIM_PE Series

Shielded Power Inductors

NIC Components Corp. is pleased to announce the release of the NPIM_PE series of extended temperature (+155°C rated) automotive grade molded metal composite SMT power inductors. The NPIM_PE series meets the requirements of AEC-Q200 and is available in nine cases sizes ranging from 5.7mm x 5.2mm to 23.5mm x 22.0mm (L x W) sizes with component height of 2.8mm to 12.6mm

Features

• Metal Composite
• High Current (to 110A)
• AEC-Q200 qualified
• -55C to +155C rated

October 30, 2019

NRB-SZ Series

Long Life High Voltage Reduced Size Alum. E-Cap

NIC Components has introduced the NRB-SZ series of radial leaded aluminum electrolytic capacitors featuring increased capacitance value per case size. NRB-SZ is supported in higher working voltages from 400VDC to 500VDC, in capacitance values from 15uF to 220uF, and with increased ripple current ratings up to 2.7Arms/100KHz. NRB-SZ series has an operating temperature range of -40°C to +105°C with extended lifetime ratings from 10,000 hours to 12,000 hours at +105°C (equivalent to >15 years under operation at +65°C). NRB-SZ is ideal for use in high voltage power supplies, inverters, motor drives, green power, and office equipment applications.

Features

• NRB-SZ series: Increased capacitance value per case size and extended lifetime ratings from 10,000 hours to 12,000 hours at +105°C (equivalent to >15 years under operation at +65°C)

September 12, 2019

NCB-A Series

Ferrite Chip Beads For Automotive Use

NIC Components is pleased to announce the expansion of automotive grade ferrite chip beads with the new AECQ200 NCB-A series

Features

• � Meets the Requirements of AECQ200
• � Rugged construction in standard EIA chip sizes
• � Effective EMI suppression up to 100Mhz
• � Impedance ranges up to 2,700Ω
• � Available in 0201 (0.6x0.3mm) to 1206 (3.2x1.6mm) chip sizes

September 12, 2019

NCB-HA Series

High Current Ferrite Beads For Automotive Use

NIC Components is pleased to announce the expansion of high current automotive grade ferrite chip beads with the new AECQ200 NCB-HA series

Features

• NIC Components is pleased to announce the expansion of high current automotive grade ferrite chip beads with the new AECQ200 NCB-HA series.

September 10, 2019

NSPE-ZJ Series

Extended Temperature and Life Hybrid (Solid-Liquid) Construction -55°C ~ 135 / 145°C

NIC Components Corp, a leading global supplier of electronic components, today introduced the NSPE-ZJ series of SMT hybrid construction aluminum electrolytic capacitors featuring increased operating temperatures and extended lifetimes. NSPE-ZJ is supported in working voltages from 25-63VDC, in capacitance values from 33uF to 330uF and with increased ripple current ratings up to 2Arms/100KHz (+135°C). NSPE-ZJ series has an operating temperature range of -55°C to +145°C with extended lifetime ratings from 2000 hours (+145°C) and 4000 hours at +135°C (equivalent to 32,000 hours at +105°C).

Features

• -55°C to +145°C operating temperature rated
• Dual rated for
• +135°C and +145°C
• Higher RCR (up to 2Arms) and twice lifetime
• upgrade (4000 hours) at +135°C, as compared to +145°C
• Lifetime
• equivalent to 32,000 hours at +105°C
• Voltage ratings from 25VDC
• to 63VDC
• Supported in wide-terminal (vibration resistant)
• version
• AEC-Q200; suitable to use in automotive applications
• +260°C reflow rated

April 27, 2018

NURC Series

USB 3.1 TYPE C CONNECTORS

NIC Components is pleased to offer the NURC series of USB 3.1 Type C connectors continuing the expansion into connectors and cable assemblies.

Features

• USB Type C 3.1 to target emerging products
• High speeds up to 10 Gb/s
• Supports 5A max. power supply
• SMT and Hybrid (SMT + PTH) Options Available

January 3, 2018

NUCA Series

USB Cable Assemblies

NIC is pleased to offer the NUCA series of USB cable assemblies expanding beyond their traditional lineup of performance passives.

Features

• 3.1 and 2.0 USB Standards
• Type A, C and micro B connector styles
• Custom length and connector options available

November 8, 2017

NRCPH Series

Anti-Surge Automotive Thick Film Resistors

NIC Components has expanded their thick film chip resistor family with the AECQ200 anti-surge NRCPH series.

Features

• Meets the Requirements of AECQ200
• Surge withstanding voltages and higher power vs. traditional thick film chip resistors
• 0603 ~ 1210 Chip Sizes Available
• Power ratings to 0.75W (1210 Chip Size)
• Wide resistance value range (1.0 Ω to 1 MΩ)
• Stable TCR (100PPM/°C available)

October 30, 2017

NPIM_LP Series

Enhanced Performance Ultra Small High Current Power Inductors

NIC Components is pleased to announce the expansion of the automatic assembly power inductor family with the new NPIM_LP series offering enhanced performance compared to the NPIM_L series.

Features

• High Saturation Current Characteristics
• High Efficiency
• Stable Performance > 1Mhz
• 3 Height & Size Combinations

October 26, 2017

NPIM_W Series

NPIM Shielded Power Inductors

NIC Components is pleased to announce the expansion of the metal composite high current shielded power inductor family with the new NPIM_W series with the ability to operate in temperatures up to 180C

Features

• Meets the Requirements of AECQ200
• High Saturation Current Characteristics (~118A)
• High Efficiency (2x improvement over ferrite core inductors)
• Stable Performance > 1Mhz

September 25, 2017

NRCPS Series

Sulfur Resistant Anti-Surge Thick Film Resistors

Newly released NRCPS series from NIC Components focuses on sulfur resistance and anti-surge for harsh environments

Features

• Meets the Requirements of AECQ200
• Excellent sulfur resistant characteristics
• Surge withstanding voltages and higher power vs. traditional thick film chip resistors
• 0603 ~ 1210 Chip Sizes Available
• Power ratings to 0.75W
• Wide resistance value range (1.0 Ω to 1 MΩ)
• Stable TCR

June 22, 2017

NDTV Series

SMD Transient Voltage Suppressors

NIC Components Corp., a leader in passive component technologies, is pleased to announce the addition of transient voltage suppressors to their circuit protection portfolio with the new NDTV series.

Features

• MINIATURE SMA, SMB & SMC CASE SIZES
• QUICK RESPONSE & LOW CLAMPING VOLTAGES
• REFLOW SOLDERING APPLICABLE
• TAPE & REEL PACKAGING FOR AUTOMATIC PICK-PLACE

March 13, 2017

NSPE-TJ Series

Ultra High Ripple Current Hybrid Alum E-cap

NIC Components is pleased to announce the release of the NSPE-TJ series offering a 35% to 60% increase in ripple current ratings reducing the total amount of components once required.

Features

• Ultra-High Ripple Current Ratings up to 3.8Arms
• Stable ESR & Z over Temperature
• Reduce the number of components used
• Low leakage current, upgrade over solid polymer type

February 17, 2017

NPIM_Z Series

Ultra High Performance High Current Power Inductors

NIC Components Corp., a leader in passive component technologies, is pleased to announce the expansion of the metal composite high current shielded power inductor family with the newly expanded ultra-high performance NPIM_Z series.

Features

• AECQ200 Available
• Soft Saturation
• Extremely Low DCR For High Efficiency
• Stable Performance > 1Mhz
• Very Low Acoustic And Leakage Flux Noise
• 5 Height & Size Combinations

February 7, 2017

NSPE-TC Series

Hybrid Aluminum Electrolytic Capacitors

NIC Components, a leader in performance passives, is pleased to announce the release of NSPE-TC series featuring the maximum capacitance value per case size obtainable today.

Features

• Higher capacitance per case size
• Stable ESR & Z over Temperature
• Low ESR & High Ripple Current ratings
• Reduce the number of components used
• Low leakage current, upgrade over solid polymer type

January 24, 2017

NIN-S Series

Ultra High Performance Wirewound RF Chip Inductor

NIC Components is pleased to announce the expansion to its RF chip inductor family with the new ultra-high performance NIN-S series.

Features

• Ceramic body high performance wirewound construction
• 0402 Chip Sizes
• High current ratings up to 3,150mA
• Higher Q and lower DCR than NIN-Z series
• SRF values as high as 18 GHz

December 28, 2016

NPXI Series

Upgrade X2 Safety Film Capacitors for Improved Stability

NIC Components Corp has expanded its offering of safety film with internal series and mono constructions, both are upgrades from standard construction film capacitors.

Features

• Stable performance in voltage dropper capacitive power supply applications
• X2 safety capacitor rated
• High capacitance values
• Self-healing
• Compact & Reduced Case Sizes

December 19, 2016

NIN-Z Series

High Performance Wirewound RF Chip Inductor

NIC Components is pleased to announce the expansion to its RF chip inductor family with the new High Performance NIN-Z series.

Features

• Ceramic body high performance wirewound construction
• 0402 & 0603 chip sizes available
• High current ratings up to 2300mA
• Higher Q and lower DCR than standard NIN-H series
• SRF values as high as 16 GHz

November 16, 2016

NSPE-J Series

150C Rated Hybrid Aluminum Electrolytic Capacitors

NIC Components is pleased to announce the addition of ultra-high temperature, 150C rated, NSPE-J series of surface mount aluminum electrolytic capacitors, to its growing family of hybrid construction capacitors.

Features

• Wide operating temperature -40°C to +150°C
• ~24,000 hours estimated lifetime at +105°C
• Best performance aspects polymer & liquid constructions
• Stable ESR & Z over Temperature
• Low ESR & High Ripple Current ratings
• Low leakage current from hybrid construction

August 18, 2016

NEXMW Series

Wide Temperature Memory Back-Up Double Layer Capacitors

NIC Components is pleased to announce the expansion of the electric double layer capacitor (EDLC) family with the upgraded 85C radial leaded NEXMW series.

Features

• Double Layer Construction
• Wide operating temperature -40C to +85C
• Extended lifetime (from +70C NEXM Series)
• Up to 50uA discharge current
• Ideal for high energy storage applications
• Horizontal mounting option; 7.0mm height

August 18, 2016

NEXGW Series

Wide Temperature Memory Back-Up Double Layer Capacitors

NIC Components is pleased to announce the expansion of the electric double layer capacitor (EDLC) family with the upgraded 85C radial leaded NEXGW series.

Features

• Double Layer Construction
• Wide operating temperature -40C to +85C
• Extended lifetime (from +70C NEXG Series)
• High current discharge (up to 500uA)
• Ideal as long term backup for real time clock and memory

July 26, 2016

NPIS_LA Series

AECQ200 High Performance Shielded Power Inductors

NIC Components is pleased to announce the expansion of the surface mount power inductor family with the NPIS_LA series of automotive grade shielded power inductors.

Features

• Meets the Requirements of AECQ200 (85°C)
• Fully automatic process provides better performance at a lower cost
• Ferrite Resin Shielding reduces buzz noise to ultra-low levels
• Low DCR & Increased Isat & Irms current ratings
• 7 Height & Size Combinations with 1.0mm Low Profiles Available

July 19, 2016

NPIM_PA Series

AECQ200 Metal Composite High Current Power Inductors

NIC Components is pleased to announce the expansion of the metal composite high current shielded power inductor family with the new automotive grade NPIM_PA series.

Features

• Meets the Requirements of AECQ200
• High Saturation Current Characteristics (~118A)
• High Efficiency (2x improvement over ferrite core inductors)
• Stable Performance > 1Mhz
• 6 Height & Size Combinations with Low Profiles Available

June 7, 2016

NRLLW Series

10,000 hour @ +105C Reduced Case Size Snap-In Aluminum Electrolytic Capacitors

NIC Components is pleased to announce the expansion of the snap-in aluminum electrolytic capacitor product line with the new ultra long life NRLLW series.

Features

• 10,000 hour load life @ +105°C
• Lower profile options vs. competitors
• Higher ripple current ratings vs. competitors

May 24, 2016

NPXH Series

Extended Range X2 Interference Suppression Safety Capacitors

NIC Components is pleased to announce the addition of NPXH series of X2 class Safety Capacitors to its expanded family of radial leaded (LDD) high performance film capacitors

Features

• Self-Healing Construction
• X2 Safety Cap Classification For Use In Across-The-Line Applications
• Wide Cap Range: 0.001uF ~ 10uF
• High VAC Rating: 300VAC / 310VAC / 330VAC
• Safety Agency Listings: UL, cUL, ENEC, CQC
• Reduced Size Options
• Tape And Box Packaging Supported

May 24, 2016

NPXF Series

X1 Class Safety Film Capacitors

NIC Components is pleased to announce the addition of NPXF series of X1 class Safety Capacitors to its expanded family of leaded (LDD) high performance safety agency listed film capacitors. NPXF series expands upon the established NPX & NPXH series of X2 Safety Capacitors, with higher voltage rating; up to 440VAC, in capacitance value range, from 1000pF to 10uF.

Features

• Safety Agency Listed: UL, cUL, ENEC, CQC
• X1 Safety Cap Classification For Use In Across-The-Line Applications
• Metallized Polypropylene Film
• Non-Inductive & Self-Healing Construction
• RoHS Compliant & Pb-Free Finish
• Molded Case Meets UL-94V-0 Flammability Test

May 24, 2016

NPYT Series

Y1 & Y2 Interference Suppression Capacitor

NIC Components is pleased to announce the addition of NPYT series of Y1 & Y2 class Safety Capacitors to its expanded family of leaded (LDD) high performance safety film capacitors. NPYT series expands upon the NIC established X class of safety capacitors (X1, X2), covers capacitance value range of 1000pF to 0.1uF, in 250V to 500VAC voltage ratings. NPYT series is designed for use connected between Line(L) or Neutral (N) and Ground (G) in North America, and between L-1 or L2 and Ground in Europe, to suppress common mode interference (EMI).

Features

• Self-Healing Construction
• Y2 Class Safety Capacitors
• High VAC Ratings: 250VAC to 500VAC
• High Withstanding Voltage; 2000VAC or 4000VDC
• Safety Agency Listed: UL, cUL, ENEC, CQC
• IEC 60068-1 Climatic category 40/110/56

May 3, 2016

NAUJ Series

Ultra High Temperature +150degC Rated; V-Chip

NIC Components is pleased to announce the addition of NAUJ series of ultra-high temperature +150°C rated automotive grade long lifetime capacitors to its expanded family of surface mount (SMT) aluminum electrolytic capacitors.

Features

• -40°C to +150°C Operating Range
• Automotive Grade AEC-Q200
• Extended Lifetime; 1000 hrs @ +150°C
• 24,000 hrs @ +105°C, 96,000 hrs @ +85°C
• 10X10.8, 12.5X14 sizes
• W Wide terminal option for high vibration applications

April 6, 2016

NAYT Series

+135C Extended Temperature (2KHr); V-Chip

NIC Components is pleased to announce the addition of NAYT series of extended temperature 135°C rated automotive grade long lifetime capacitors to its expanded family of surface mount (SMT) aluminum electrolytic capacitors

Features

• -40°C to +135°C Operating Range
• 47uF to 1000uF / 16V to 50VDC
• Automotive Grade AEC-Q200
• Extended Lifetime
• 2,000 hrs @ +135°C
• 16,000 hrs @ +105°C, 64,000 hrs @ +85°C
• 8X10.8 / 10X10.8 / 12.5X14 sizes
• �W� Wide terminal option for high vibration applications

January 13, 2016

NSPE-HF Series

+105C Hybrid Aluminum Electrolytic Capacitors feature Increased Capacitance per Case Size

NIC Components is pleased to announce the addition of NSPE-HF series, of +105C rated surface mount aluminum electrolytic capacitors, featuring increased capacitance per case size, to its growing family of surface mount hybrid aluminum electrolytic capacitors.

Features

• Higher capacitance per case size
• Reduced case size and unit cost savings
• Stable ESR & Z over Temperature
• Low ESR & High Ripple Current ratings
• Reduce the number of components used
• Reduce PCB size - costs and component placement costs
• Low leakage current, upgrade over solid polymer type

January 13, 2016

NSPE-TF Series

Wide Temperature, High Cap & Voltage
Hybrid (Solid-Liquid) Construction

NIC Components is pleased to announce the addition of the extended temperature NSPE-TF series to its growing family of surface mount hybrid aluminum electrolytic capacitors.

Features

• Wide Operating Range -55°C to +125°C
• Higher capacitance per case size
• Low ESR & high ripple current ratings
• Low leakage current, upgrade over solid polymer type
• Extended load life at higher temperatures

November 13, 2015

NSPL Series

Low ESL Solid Polymer Aluminum Electrolytic Capacitors

NIC Components is pleased to announce the addition of NSPL series of three terminal low ESL solid polymer aluminum electrolytic capacitors, to its expanded SMT solid polymer capacitor products offering. Third terminal construction greatly decreases the impedance loop, and reduces the equivalent series inductance (ESL) of the NSPL series by up to 50%, as compared to standard 2-terminal construction.

Features

• Decoupling and noise suppression in high-speed circuits
• Improved response time in power circuits
• Reduce the number of decoupling components used
• Reduce PCB size - costs and component placement costs
• Wide operating range of -55°C to +105°C
• Stable with voltage, temperature and time
• No voltage derating
• Reduce noise (ripple voltage)
• Eliminates piezoelectric ringing & singing

November 12, 2015

NMC-R Series

Reverse Geometry Low ESL Ceramic Chip Capacitors MLCCs

NIC Components is pleased to announce the addition of low equivalent series inductance (ESL) version products to its� expanded offering of multilayer ceramic chip capacitors (MLCCs). New NMC]R series utilizes reverse geometry construction to reduce ESL by up to 60%, as compared to standard construction MLCCs.

Features

• Low Inductance (ESL) for decoupling applications
• Reduces ESL up to 60%
• Decoupling and noise suppression in high-speed circuits
• Improved response time in power circuits
• Reduce the number of decoupling components used
• Reduce PCB size - costs and component placement costs

October 27, 2015

NPIM_L Series

Reduced Size High Current Shielded Power Inductors

NIC Components has expanded the NPIM family of high current shielded power inductors with the release of the new NPIM_L series for focus on reduced sizes, lower profiles and increased performance and efficiency.

Features

• High Saturation Current Characteristics (~10.8A)
• Low DC Resistance in milli Ohm (mΩ) range
• High Efficiency and Stable Performance > 1Mhz
• 7 Height & Size Combinations
• 1.0mm and 1.2mm Low Profile Options

August 20, 2015

NRB-XZ Series

Radial Leaded Aluminum Electrolytic Capacitors

NIC Components is pleased to announce the addition of NRB-XZ series of miniature radial leaded aluminum electrolytic capacitors to its expanded radial leaded (LDD) capacitor offering.

Features

• Reduced case sizes with >20% case size reduction (miniaturization)
• Multiple case sizes in popular CVs
• Extended lifetime rated; up to 12,000 Hours @ +105°C
• Supported in 10uF to 820uF capacitance values
• Voltage ratings from 160VDC to 450VDC
• High ripple current ratings to 4.46Arms / 100KHz/+105°C
• Temperature Range : -40°C to +105°C

August 12, 2015

NCLS Series

Metal Foil Surface Mount Current Sensing Resistor

NIC Components is pleased to announce the addition of low cost NCLS series of metal foil on ceramic construction current sensing resistors, to its expanded offering of SMT resistive products.

Features

• Small 0603, 0805 & 1206 sizes
• Low Profile; 0.60 ~ 0.90mm H
• Lower surface temperature
• High pulsed power capability
• (No trimming performed)
• Lower cost than metal strip
• 0.25W ~ 1W rating (Current rating; 3.5A ~ 12.9A)
• Stable TCR: +/-100PPM/ �°C
• Resistance range: 5mOhm ~ 40mOhm
• Precision 1%, 2%, �5% tolerance

July 24, 2015

NRSNS Series

Surface Mount Anti-Sulfur Resistor Networks

NIC is pleased to announce the addition of NRSNS series of Automotive Grade Thick Film Resistor Arrays to its expanded offering of automotive grade components.

Features

• Automotive Grade Components, AEC-Q200 Qualified
• TS-16949 Certified Production Site
• Small Size (1mm x 2mm, 1.6mm x 3.2mm)
• Low Profile (0.6mm max height)
• Anti-Sulfur construction for use in harsh environments
• High Density Packaging (0.5mm & 0.8mm terminal pitch)
• Lower Production Costs With Less Placement (4 Resistors In One Package)

June 19, 2015

NMC-A Series

Automotive Grade MLCCs

NIC Components is pleased to announce the addition of NMC-A series of AEC-Q200 qualified ceramic chip capacitors to its� expanded family of automotive grade components.

Features

• Automotive Grade Components from TS-16949 Certified Production Site
• AEC-Q200 Qualified
• Ultra-Stable NPO and High Capacitance X7R TCCs
• Voltage ratings 10V, 16V, 25V, 50V, 100V, 200V, 250V, 500V & 630V
• Temperature Range : -55°C ~ +125°C (AEC-Q200 grade �1�)
• Standard 0402, 0603, 0805, 1206 and 1210 case sizes

March 20, 2015

NCCA Series

AECQ200 Common Mode Choke; USB & IEEE Interface

NIC Components is pleased to announce the expansion of the EMI Suppression family with the NCCA Automotive Grade Common Mode Chokes.

Features

• High Reliability Complied to AECQ200
• High Common Mode Impedance at High Frequency
• Suitable for High Speed Digital Equipment
• Low Profile Surface Mount Packages in 0805 & 1206 Chip Sizes

February 26, 2015

NVH Series

Chip Varistor

NIC Components is pleased to announce the expansion of its circuit protection line to include new NVH series of high voltage & high current chip varistors.

Features

• High surge current suppression and energy absorbing capabilities
• Bidirectional clamping and low clamping voltages
• 4 size offerings in a multilayer design

November 12, 2014

NRCV Series

High Voltage Thick Film Chip Resistors

NIC Components is pleased to announce the addition of NRCV series of high voltage rated thick film chip resistors, to its expanded resistive products offerings.

Features

• 2000V / 3000V ratings (10X upgrade from 200V / 250V standard ratings in 2010 / 2512 sizes)
• Small package sizes and low profile
• Low unit cost
• Thick Film On Alumina Substrate, RuO2/Ag Resistive layer
• Glass & Epoxy Overcoat

November 12, 2014

NRLQW Series

Reduced Size Snap-In Aluminum Electrolytic Capacitors

NIC Components is pleased to announce the addition of NRLQW series snap-in type aluminum electrolytic capacitors in reduced case sizes

Features

• Lower Profile, up to 10mm lower height
• High Voltage (Up To 500VDC)
• 2000 hour load life @ +105°C
• High Ripple Current

November 11, 2014

NCLP Series

High Current, Low EMF Metal Strip Current Sensing Chip Resistors

NIC Components is pleased to announce the addition of NCLP series metal strip current sensing resistors to its expanded offering of SMT resistive products.

Features

• Ratings to 3W (up to 55A)
• Stable TCR: +75PPM/°C
• Resistance range: 1mOhm ~ 500mOhm
• Precision Tolerance: 1%, 2%, 5%
• EIA 2512 case size
• Low thermal EMF

October 3, 2014

NGTD Series

Surface Mount Gas Discharge Tube

NIC Components continues its expansion into over voltage circuit protection with NGTD the series 3-Terminal surface mount gas discharge tubes

Features

• Fast Response Time
• High Current (5,000A @ 8/20uS)
• Dual Element 3020 (7.8 x 5.0 x 6.0 mm) Case Size

October 3, 2014

NGTA Series

Surface Mount Gas Discharge Tubes

NIC Components continues its expansion into over voltage circuit protection with the NGTA series chip gas discharge tubes

Features

• Fast Response Time
• Small Chip Style 1812 Case Size
• Low Capacitance and Insertion Loss

October 3, 2014

NGTM Series

Surface Mount Gas Discharge Tubes

NIC Components continues its expansion into over voltage circuit protection with the NGTM series surface mount gas discharge tubes

Features

• Ultra High Current (20,000A @ 8/20uS)
• Single Element 2332 (6.0 x 8.3 x 8.3 mm) Case Size
• Low Capacitance and Insertion Loss

October 3, 2014

NGTF Series

Surface Mount Gas Discharge Tubes

NIC Components continues its expansion into over voltage circuit protection with the NGTF series chip gas discharge tubes

Features

• Fast Response Time
• High Current (5,000A @ 8/20uS)
• Single Element 2016 (4.2 x 5.0 x 5.0 mm) Case Size
• Low Capacitance and Insertion Loss

October 3, 2014

NGTC Series

Surface Mount Gas Discharge Tubes

NIC Components continues its expansion into over voltage circuit protection with the NGTC series chip gas discharge tubes

Features

• Fast Response Time
• High Current (2,000A @ 8/20uS)
• Small Chip Style 1812 Case Size
• Low Capacitance and Insertion Loss

September 26, 2014

NFVC_S Series

NFVC_S Series of Slow Blow Chip Fuses

NIC Components is pleased to announce the addition of NFVC_S series of 125VAC rated surface mount chip fuses utilizing wire in air construction, for superior inrush current characteristics as compared to thick and thin film type SMT chip fuses.

Features

• NFVC_S FEATURES
• Wire In Air Construction
• High Inrush Current (I2T)
• 125VAC rating
• UL Safety Listed
• Small 6125 (2410) case size
• 1.0A to 5A ratings
• Wide Temp Range : -40°C ~ +125°C

August 28, 2014

NTRA Series

Automotive Grade Thin Film Chip Resistors

NIC Components expands Resistor Offering with Automotive Grade Thin Film Resistors

Features

• TS-16494 certified production site
• Low Noise Construction
• Precision Tolerance
• Ultra-Stable TCR
• EIA 0402 ~ 2512 case sizes
• 1/16W ~ 1/2W ratings
• 25V ~ 200V ratings

August 26, 2014

NRSNL Series

Lead Free Chip Resistor Arrays

NIC is pleased to offer NRSNL series of Pb free thick film chip resistor arrays, which does not take the RoHS exemption, as the level of Pb has been reduced below the RoHS threshold of 100PPM (0.01%)

Features

• RoHS compliant (Pb-Free) without exemption
• Low Cost Thick Film Construction
• EIA 0408 & 0612 case sizes
• 1/16W & 1/10W ratings
• 50V ratings
• E24 (5%) & E96 (1%) value
• Temperature Range : -55°C ~ +155°C

July 18, 2014

NRCW Series

High Power Thick Film Chip Resistor

NIC Components expands Resistor Offering with High Power Thick Film Resistors

Features

• Double power rating in 0805, 1206 and 2512 sizes
• Power ratings to 2W
• Wide resistance value range (1.0 Ω to 1 Meg-Ω)
• Stable TCR (100PPM/�°C)
• 5 EIA case sizes

June 3, 2014

NST Series

Surface Mount NTC Thermistors

NIC Components expands #Thermistor Offering with NST Series #NTC #Thermistors

Features

• Fast response to temperature variations
• Multilayer Design
• Stable Performance vs. temperature
• Standard 0402, 0603, & 0805 sizes available

May 28, 2014

NPIM_A Series

Metal Composite Shielded; Automotive Grade

New NPIM_A series Power Inductors offer operating temperature ratings up to 150°C and meet AEC-Q200 testing requirements!

Features

• Meet testing requirements of AEC-Q200 Table 5
• High Saturation Current Characteristics (~42A)
• Operating Temperature Range up to +150°C
• Stable Performance & High Efficiency
• 9 Height & Size Combinations with profiles as low as 3.0mm

February 27, 2014

NFVC_H Series

NFVC_H Series of High Inrush Chip Fuses, Protection up to 250VAC

New NFVC_H series High Inrush 250VAC Chip Fuses feature high inrush withstanding performance with current ratings up to 5A

Features

• 250 VAC rating
• UL Safety Listed
• Small 6125 (2410) case size
• 1.0A to 5A
• Wide Temp Range : -40°C ~ +125°C

February 20, 2014

NSPE-A Series

Long Life, High Voltage Hybrid (Solid-Liquid) Construction

New NSPE-A series Hybrid Aluminum #capacitors features 10,000 hour life,and #voltage ratings up to 80V!

Features

• 10,000 hours load life rating
• Ultra Low ESR and High Current Ratings
• Superior performance at low temperatures
• Low leakage current and self healing advantage over solid polymer types

January 30, 2014

NRCL Series

Thick Film Chip Resistors; Lead Free

NIC is pleased to offer NRCL series of Pb free thick film chip resistors, which does not take the RoHS exemption, as the level of Pb has been reduced below the RoHS threshold of 1,000PPM (0.1%).

Features

• RoHS compliant without exemption
• Low Cost Thick Film Construction
• EIA 0201 ~ 1210 case sizes
• 1/16W ~ 1/3W ratings
• 25V ~ 200V ratings