 |
Film chip capacitors offer stable performance
 The
NSHC and NSPU series stacked film chip capacitors provide
stability under voltage, stability over time, immunity from cracking, and
low dielectric loss. Available in case sizes of 0603, 0805, 1206, 1210,
1913, and 2416, the NSHC uses a stacked metallized polyphenylene sulfide
film construction to enable an operating temperature range from –55° to
125°C, capacitances from 100 pF to 0.22 µF, and voltage ratings of either
16 or 50 Vdc.
The NSPU series features a stacked metallized acrylic
resin film construction, comes in case sizes of 0805, 1206, and 1210
formats, and features values from 0.068 to 1.0 µF with a 16-Vdc voltage
rating. Operating temperature range is –40° to 85°C. ($0.09 to
$0.30—available now.)
|
Thin-film chip resistors suit lead-free apps
 The
NTR Series thin-film lead-free chip resistors offer values from 1 W to 1
MW with tolerances from 0.1% to 0.5%. Rated for voltages from 25 to 150 V,
the devices feature a nickel-chromium sputtered element on alumina
substrate construction.
Wrap-around terminations feature a nickel barrier and a tin finish, and
are compatible with tin-lead and lead-free soldering processes. Operable
in temperatures from –55° to 125°C, the devices come in case sizes from
0402 to 2512. (From $0.01 to 0.08 ea/prod qty—stock to 8 weeks ARO.)
|
Aluminum Electrolytic Capacitors
The
NRSZC Series
of reduced size miniature low ESR aluminum electrolytic capacitors available in
values from 47uF to 18,000uF; rated from 6.3VDC to 35VDC. Available
in case sizes from 5mm x 11mm to 18mm x 41mm (D x L); operates over
temperature range of -55dgeC to +105degC. Designed for use in reduced
size voltage regulators, power supplies and DC-DC converters.
|
Capacitors electrolytic
NRSK series
PDF
Data Sheet
Aluminum electrolytic capacitors have ESR as low as 0.012ohm; handle
ripple currents up to 2.8Arms at 105°C and 100 kHz; come in values from
470 to 3,300 µF; are rated at 6.3 to 16VDCc; are available in 8- and 10-mm
case
diameters.
ea/prod qty from $0.06
|
Wirewound chip inductors
handle high currents
The NIN-H series miniature wirewound chip
inductors handle up to 1 A while providing minimum Q values of 20 to
 65. The 0805-size devices are rated from 3.3 to 820 nH, with current handling of 180 to 600 mA, and SRFs from 188 to 7,900 MHz. The 1008-size devices are rated from 10 to 4,700nH, with current handling of 260 to 1,000
mA, and SRFs from 90 to 4,100 MHz. Operating from –40° to 125°C, the inductors are
compatible with both wave
and reflow soldering. (From $0.15 ea/prod qty--8 to 10 weeks ARO.)
|
Chip inductors
 Multilayer chip inductors feature Q values greater than 50 at 1 GHz, SRFs
greater than 2
GHz, and inductance values from 1.0 to 56 nH (0402 package) and from 1.5
to 220 nH (0603
package); offer available tolerances of ±0.5 nH, ±5% and ±10%; operate
over –40° to 85°C.
NML
Series From $0.06 to $0.08 ea/prod qty
|
Wirewound chip
inductors
 Wirewound SMT inductors are available from 3.3 nH to 4.7 µH in 10% and
20% tolerances, are
rated up to 1 A; have a minimum Q of 50 at 250 MHz, an SRF of 6,000 MHz
min, dc resistance of
0.08 ohm max, and an operating range of –40° to 125°C.
PDF
Data Sheet
0805 and 1008 size
From $0.15
|
Cap arrays provide
0.5-mm spacing between elements
 NCA
series ceramic chip capacitor arrays are now available in a 0508-sized
package. The parts have
four isolated same-value elements in NPO and X7R ceramic dielectrics.Values range from 10 pF to 0.10 µF, in
voltages from 10 to 100 Vdc. Operating
temperature range is from –55° to +125°C. (From $0.06 ea/prod qty--8
to 12 weeks ARO.)
|
Capacitors exhibit low impedance
 The NACZF four-terminal aluminum-electrolytic capacitors have an impedance
as low as 0.028 ohm at
100 kHz, +20°C. Values range from 47 to 6,800 µF in 6.3 to 100 Vdc ratings.
The devices are available in five case sizes ranging from 12.5 x 17mm to 18 x 22 mm.
(From $0.35 ea/large qty--available now.)
|
Cap arrays
provide four elements
NCA
Series SMT ceramic capacitor arrays are eight-terminal 1206-size
components with four isolated elements. The arrays come in three
temperature coefficients: NPO in values from 10 to 1,000 pF, X7R in values
from 470pF to 0.15 µF, and Y5V in values from 0.01 to 0.47 µF.
Voltage ratings are 16 to 100 Vdc. (From $0.08 ea/large qty--6 to 8 weeks
ARO.)
|
SMT tantalum
capacitors exhibit low ESR
 The NTC-L
Series low-ESR tantalum chip capacitors come in values from 10 to 220 µF
in voltages from 6.3 Vdc to 35 Vdc. ESR at 100 kHz is as low as 0.1 ohm.
Ripple current ratings range from 370 to
1,100mA in EIA case sizes B, C, and D. Operating temperature
is –55° to
+85°C. (From $0.25 ea/large qty--stock to 10 weeks ARO.)
|
|
Aluminum
Electrolytic Capacitors
 Cylindrical can-style surface-mount
electrolytic capacitors come with 200- or 400-Vdc ratings; offered in 3.3
and 4.7 µF at 400 Vdc, and 4.7 and 10 µF at 200 Vdc; measure 10 (Dia.) x
10.8 (L) mm; rated
for 2,000 h at 105°C.
PDF
Data Sheet NACV series
ea/prod qty from $0.49 to $0.55
|
Low-ESR SMT
electrolytics are high-ripple rated
 The NSP
series of molded-case solid-polymer surface-mount aluminum electrolytic
capacitors features impedances as low as 0.05 ohm and ripple current
ratings to 1.6 A at high frequencies. Values range from 2.2 to 47 µF with
voltage ratings from 6.3 to 16 Vdc.
Measuring 7.3mm (L) x 4.3mm (W) x 1.8 (H) mm, the parts are the same package
size as tantalum D and E cases (7343)
and fit on the same land patterns. The
capacitors are compatible with automatic placement and reflow soldering
and operate over a –40° to +105°C temperature range. (From $0.49 to
$0.84 ea/prod qty--available now.)
|
|
