|
|
|
| Home > Company Information > NIC Product Press > ECN Press |
| |
 |
Stacked Film Chips for High-Loss,
Low-Stability MLCC Capacitors
www.Ecnmag.com
 NIC
Compone nts introduced two ranges of stacked
film chip capacitors. The NSHC and NSPU series
combine small component size with stability during voltage,
stability over time, immunity from cracking, and low
dielectric loss, making them suitable for high-loss and
less-stable MLCC capacitors. Both ranges are RoHS compliant.
The NSHC uses a stacked metallized polyphenylene sulfide
(PPS) film construction that helps it achieve an operating
temperature range of up to -55ºC to +125ºC with high
soldering heat resistance. Available case sizes of 0603,
0805, 1206, 1210, 1913 and 2416 allow capacitance values
from 100pF to 0.22µF with voltage ratings of 16VDC or 50VDC.
The NSHC delivers features high capacitance value using
stacked metallized acrylic resin film construction. Parts
are available in 0805, 1206 and 1210 formats with
capacitance values range from 0.068µF to 1.0µF with a 16VDC
voltage rating. Its Operating temperature range is -40ºC to
+85ºC. Both series are supplied in tape-and-reel packaging
designed for reflow soldering processes. Typical unit prices
are $0.09 ~$0.30.
|
|
Chip Resistors Made for Precision Applications
 The
NTR Series of high precision thin film construction chip resistors
from NIC Components Corporation features ultra-stable 10 ppm to 50
ppm resistance value change over wide temperature and low noise figure.
They are suited for telecommunications, automotive, medical, audio, and
test instrumentation applications. The lead-free devices have a resistance
value tolerance range of 0.1 percent to 0.5 percent and an operating
temperature range of -55°C to +125°C. Construction is nickel chromium
sputtered, thin film resistive element on alumina substrate. The
wrap-around terminations with nickel barrier and tin finish are compatible
with established tin-lead and emerging lead-free soldering processes. The
NTR Series is available in case sizes from 0402 to 2512. Resistance values
range from 1Ω to 1 MΩ, and working voltages from 25V to 150V. Parts are
supplied on an 8 mm carrier tape for automatic pick and place assembly.
Pricing is from $.01 to $0.08 each in production volumes. Delivery is from
stock to eight weeks. NIC Components Corp.
www.niccomp.com
|
SMT Aluminum Electrolytic Capacitors
 The
recently introduced
NACHL Series of SMT aluminum electrolytic
capacitors from
NIC Components features extended life
at high temperature. The devices are housed in miniature cylindrical cases
(V-chips), making them suitable for use in low profile designs with high
component densities. The capacitors are available with voltage ratings of
between 10V DC and 100V DC and capacitance values that range from 0.47 µF
to 330 µF. Their high temperature load-life rating of 5,000 hours at their
upper operating temperature of 105°C makes them suitable for high
operating temperature applications or extended life operation. The minimum
operating temperature is 40°C. Case sizes (D × L) range from 4 mm × 6.1 mm
to 10 mm × 330 µF depending on voltage and capacitance values selected.
Pricing is $.09 to $.28 each. NIC Components Corp.
www.niccomp.com
|
|
Radial Leaded Ultra-Low ESR
Aluminum Electrolytic Capacitors
 Designed for state-of-the-art (low voltage/high current) voltage
conditioning and power management applications (power supplies, DC/DC
converters, VRMs, etc.),
NIC Component Corp.'s
NRSK series of
radial leaded (LD) aluminum electrolytic capacitors feature ultra-low
ESR (Equivalent Series Resistance) and high ripple current ratings.
NRSK series features low 100 KHz ESR (as low as 0.012O) with high ripple
current ratings (up to 2.80 Arms; +105°C/100 KHz) in low cost radial
leaded configuration. They are available in capacitance values from 470 µF
to 3,300µF (±20 percent capacitance tolerance), voltage ratings from 6.3 V
DC to 16 V DC, with case diameters of 8 mm and 10 mm. They are rated for
operation at temperatures between -40°C and +105°C with load life
endurance (+105°C) rating of 2,000 hours. These devices are supplied in
bulk or tape-and-reel packaging for use with automated insertion
equipment. Pricing is from $0.06 to $0.20 each in production quantities.
Lead time is eight to 10 weeks.
NIC Components Corp.
www.niccomp.com
Data sheet:
NRSK |
|
Solid Aluminum Electrolytic Capacitors
NIC Components Corp. has announced expanded range and improved specifications on its
NSP series of molded case SMT solid aluminum electrolytic capacitors.
These specialty polymer solid electrolyte components feature ultra-low ESR
and high ripple current ratings at high frequency. Capacitance value range
increased to 390 µF and 100 KHz ESR specifications have been reduced to as
low as 0.012Ohm. These are well suited for use in output filtering
circuits of next generation lower voltage — high current DC/DC converters,
switching power supplies and voltage regulators. Pricing is from $0.55 to
$2.20 each in production volumes.
NIC Components Corp.
www.niccomp.com
Data Sheet:
NSP |
|
Large Can Screw Terminal Aluminum Electrolytic Capacitors
NSTE and NSTEW series high CV large can screw terminal aluminum electrolytic capacitors from
NIC Components are available in capacitance values up to 1.0 F and voltage ratings to 500 V DC. General purpose 40°C to +85°C (NSTE); and extended temperature 40°C to +105°C (NSTEW) temperature ratings meet long life (3,000 hour load life) guarantee at rated temperature and ripple current. Capacitance value ranges from 150 µF to 1.0 F, and voltage ratings range from 16 V DC to 500 V DC. Ripple current ratings are to 37.5 Arms (120 Hz, +85°C) and 120 Hz ESR as low as 0.0024 Ohm maximum are available. These units are suitable for high energy storage, power inverters, UPS and electric/hybrid vehicle applications. Custom CV and sizes are available. Pricing ranges from $5 to $15 each (depending upon size & CV).
NIC Components Corp.
www.niccomp.com
Data Sheets: NSTE
& NSTEW
|
|
|
Polymer/Tantalum Electrolytic Capacitors
 The
NTP series of polymer/tantalum electrolytic capacitors from
NIC Components Corp. is available in values from 3.3µF/10 Vdc to 330µF/6.3 Vdc. This series uses a unique
polymer cathode in place of manganese dioxide to obtain ESRs as low at 0.040 ohms (100KHz/+20°C)
and ripple current ratings from 880 mArms (1MHz/+20°C). The NTP series was designed for use in lower-voltage, high-current applications. This series is suitable as an alternative to low ESR tantalum or low impedance aluminum electrolytic styles. Prices range from $0.20 to $1.30 in production quantities.
NIC Components Corp.
www.niccomp.com
Data Sheet: NTP
|
|
|
Low Impedance SMT Aluminum Electrolytic Capacitors
NIC Components introduces the NACZF
Series of four terminal style low impedance +105degreesC rated surface
mount aluminum electrolytic capacitors. Featuring impedance values as low
as 0.028 (omega) (100 KHz, +20degreesC) these parts are well suited for
use in output circuits of switching power supplies, dc/dc converters and
voltage regulator modules. Capacitance values from 47 µF to 6800 µF are
available in 6.3-Vdc to 100-Vdc ratings. High temperature load life test
rating is 5000 hours. There are five case sizes; all are on tape-and-reel
and compatible with reflow soldering. Contact NIC Components Corp. www.niccomp.com
Data Sheet: NACZF
|
|
Wire Wound Chip Inductors
 NIC Corp. has introduced a new series of high current, wire wound, surface mount inductors, designated the
NIN-H series. These 0805 and 1008 size inductors are available in inductance values from 3.3 nH to 4.4µH, with current ratings to 1 A. The
NIN-H series features high Q and SRF characteristics, low dc resistance, and are suitable for reflow soldering. Prices for this series range from $0.16 to $0.30, depending on quantity and tolerance required. NIC
Components Corp.
www.niccomp.com
Data Sheet: NIN-H
|
|
|
| |
|
